CANON Printers

Make sure the cartridge is properly inserted into the holder, and that the printer cover is closed. Check the status monitor, both on the control panel of your printer and on your computer.

Note that the compatible cartridge does not light up to avoid patent infringement. If the error persists, then carefully remove the cartridge to make sure the chip on the cartridge is not loose. Then insert the cartridge back into the printer. If the error still persists, replace your cartridge.

The lighting of the cartridge has been patented by the manufacturer in order to prevent this feature being used for alternative cartridges. So it may be that no light appears when installing the new cartridge. The print quality, however, is not affected.

There is a variety of loose Canon cartridges available through the following websites:

Canon CLI-521 Black

Canon PGI-525 Black

Canon CLI-526 PhotoblackBlackCyanYellowMagenta

Canon PG-540 Black

Canon PGI-550 Black

Canon CLI-551 BlackCyanYellowMagenta

Lift the cartridge slightly upwards until it audibly clicks into position. You will feel some resistance when installing it, but you can just lightly push it through.

Did you first remove the yellow label and then the orange cap? If you removed the orange cap first, the cartridge will leak and the cartridge is then no longer usable.

If you removed the yellow label first, try the following:

When the inner foam in the cartridge is not correctly positioned, it can drip after the protective cap is removed from the ink nozzle. The dripping can be stopped in most cases by patting the ink nozzle with a folded paper towel.

Because of patents, the printer cartridge of the manufacturer may be slightly different than the original. However, this has no influence on the print quality.

If the cartridge isn’t used for long periods of time, it could cause the ink to dry out. In this case, install a new cartridge. If this is not the case, please follow the following steps for your printer type:

1. Remove the cartridge from the printer and wipe it very carefully around the chip with a clean, lint-free cloth.

2. Reinstall the cartridge and press firmly.

If this problem occurs, there is probably a fault / wear in the head cleaning mechanism of the printer. We encourage you to bring back the printer to your Canon dealer.

As long as the cartridges are closed they have a minimal life time of 2 years.

If the cartridge is low on ink or empty, you can clean the print head one or more times using the cleaning program. You can find this under “Printer Maintenance” (name may vary by printer).

You can also click on the following link, Manual for Canon Pixma printers. This redirects you to the site with Canon Pixma printers. Here you can select your printer from the list and then download the manual. The manual describes how to clean the print heads, how to align the print heads and how you can check the ink levels.

The black colour can look different  (slightly less deep) than the original. This has to do with the ink, but does not harm the printer.

If the black really looks grey, it can also be due to the printer settings:

Check the paper settings. This should be set to “plain paper”. If the paper set is to “Glossy” the print turns to grey. To change the setting, click on Control Panel> Devices and Printers> Select the printer and click the right button> Printing Preferences> Tab: Paper / Quality> Media: Plain paper

The grey cartridges are only useable by some printers, this is the reason they are not in the set. You can order loose grey cartridges on the following links:

Canon CLI-521 Grey

Canon CLI-526 Grey

Canon CLI-551XL Grey

First make sure you have removed the seal / tape from the cartridge. If removed and no error message appears, you can perform a cleaning program.

You can click on the link, Manual for Canon Pixma printers. You are then redirected to the site with Canon Pixma printers. Here you can select your printer from the list and then download the manual. The manual describes how to clean the print heads, how to align the print heads and how you can check the ink levels.

EPSON Printers

Press ‘Continue’ and start your print job as you normally would.

This is an informational message. Epson merely indicates that this cartridge is not an original. This does not affect the quality. Confirm the message and you can continue printing as usual.

It is possible that the chip on one of the cartridges makes little or no contact with the electrical contacts in the printer.

The cartridge holder needs to be placed in the replacement position. To do this, press the Ink / OK button on the printer to print or follow the step-by-step instructions in your printer maintenance menu.

Lift the flap over the cartridges and push the cartridge firmly in place with your hands. If this fails, lift the cartridge gently. Then firmly replace the cartridge back into position to ensure the chip makes proper contact with the connection points inside the printer.

When installing compatible Epson cartridges,  accurate positioning of the cartridges in the printer is required. Make sure the cartridge is installed correctly. You should be able to read the logo on the top of the cartridge!

If the cartridge had been working properly before this Notification appeared, then it means that the cartridge is empty. Replace the cartridge with a new one to solve this issue. (The reason the printer does not indicate that the cartridge is empty is because Epson has a patent.)

It may happen that the chip reader gets loose when you replace the cartridge.

If this is the case, you can easily push back the chip into the printer.

Put the chip back into place and press firmly on. See photo for proper placement.

When the chip reader is placed back correctly, the cartridges can be installed again.

With Epson cartridges, accurate positioning of the cartridges is required in the printer. The error message could mean that the cartridges are not installed properly. Remove the cartridge from the printer. Clean the chip gently with a damp, lint-free cloth or paper towel. Press OK or reset the printer.

When you click on the link, Manual for Epson Stylus printers, you are redirected to the site with Epson printers. Here you can select your printer from the list and then download the manual. The manual describes how to clean the printheads, how to align the print heads and how you can check the ink levels.

As long as the cartridges are closed they have a minimal life time of 2 years.

The black colour can be slightly different (slightly less deep) from the original. This has to do with the ink, but does not harm the printer.

If the black really looks grey, it can also be due to the printer settings:

  1. Check the paper settings. This should be set to “plain paper”. If the paper set is to “Glossy” the print turns to grey. To change the setting, click on Control Panel> Devices and Printers> Select the printer and click the right button> Printing Preferences> Tab: Paper / Quality> Media: Plain paper
  2. If you are using the Epson Status Monitor software, it can also be that the printing settings is set as “draft” copy. You will see the following options in Printer Properties:

 

Perform a cleaning of the print heads. The cleaning can be found in the service menu of your printer.

When you click on the link, Manual for Epson Stylus printers, you are redirected to the site with Epson printers. Here you can select your printer from the list and then download the manual. The manual describes how to clean the printheads, how to align the printheads and how you can check the ink levels.

Print a test page to see if the nozzles are free from blockages. If the lines / stripes still appear on the printed page, repeat the steps. If two black lines appear on the printed test page, enter up to two cleaning cycles. When you see three black lines, enter up to three cleaning cycles: in most cases blocked spray channels are caused by trapped air inside the print head. If after the cleaning cycle the lines / stripes still do not disappear, allow the printer to rest for half an hour and then check the rollers.

Should there still be no improvement, it is a good idea to let the cartridge rest for another two hours. During this rest period, ink will flow through the cartridge and absorb the trapped air and / or by pressing the print head to the outside.

When the cartridges are permanently removed from the Epson printer, the printhead is subject to dehydration, which can stop the Epson from printing. So please replace the used cartridges only when you have replacement cartridges available. Never unplug the printer from the power supply while the printer is active, for instance during paper handling, cleaning cycles, and printing. When the printer is not in use, the print head is closed by the locking mechanism to prevent dehydration.

“Clean Printheads” consumes a lot of ink. It can also help to print a page with large areas of colour. This way, the spray nozzle can flow through well. Click here for an example: ColourTest-sheet.pdf

If the above solutions do not improve then you can apply for your cleaning cartridge through the page cleaning cartridge. Click here to request cleaning cartridges

First, check to make sure the yellow tape is removed from the cartridge. If the yellow tape has been removed and no error message appears, you can perform a cleaning program. You can find this program under “Printer content” (name may vary by printer).

You can also click on the link, Manual for Epson Stylus printers. You are then redirected to the site with Epson printers. Here you can select your printer from the list and then download the manual. The manual includes information on how to clean the print heads, how to align the print heads and how you can check the ink levels.

Remove the cartridge from the printer and gently wipe the chip on the cartridge with a clean, dry paper towel. Then insert the cartridge back into the printer.

This message on the cartridges means that it is (almost) empty and needs to be replaced. If this is a new cartridge, and therefore cannot be empty, remove the cartridge from the printer and clean the chip gently with a damp, lint-free cloth or paper towel.

HP Printers

  • The Following printers are working perfect with the inkline HP 364XL cartridges. Unfortunately you can not buy these printers new in a store anymore. Maybe you can find one of these printers second-handed:

HP Photosmart 551, 5512, 5514, 5515, 5520, 5522, 5524, 6510, 6520, 7510, 7515, 7520, B010, B109, B110, B111, B209, B210, B8550, C309, C310, C410, C510, C5300, C6300, D5400, D7500, Deskjet 3070, 3520, 3524, Officejet 4620, 4622.

If you are really searching for a new printer that uses inkline cartridges? We recommend you to get a Canon printer then.

The Following printers are working perfect with inkline cartridges. Unfortunately you can not buy these printers new in a store anymore. Maybe you can find one of these printers second-handed:

  • Inkline Canon 520 / 521 cartridges: Canon Pixma iP3600, iP4600, iP4700, MP540, MP550, MP560, MP620, MP630, MP640, MP980, MP990, MX860, MX870
  • Inkline Canon 525 / 526 cartridges: Canon Pixma iP4850, iP4950, iX6550, MG5150, MG5250, MG5350, MG6150, MG6250, MG8150, MG8250, MX715, MX885, MX895
  • Inkline Canon 550 / 551 cartridges: Canon Pixma MG5450, MG5550, MG6350, MG6450, MG6650, MG7150, MG7550, IX6850

If you are searching for a new printer that uses inkline cartridges? The following printers that are using the inkline Canon 550/551 cartridges are a good option:

Inkline Canon 550 / 551 cartridges:

If you can’t click away the message “cartridge not recognized”, it means the ink channels may be clogged. This blockage can be solved by running the cleaning program on your printer. You can find this under “Printer Maintenance” or “Printer Properties”. If you do not get immediate results, the cleaning program should be repeated one or two times.

By clicking on the link Guide for HP printers, you are redirected to the site with HP printers. Here you can select your printer from the list and then download the manual. The manual describes how to clean the printheads, how to align the printheads and how you can check the ink levels.

If you do not get immediate results, the cleaning program should be repeated one or two times. If this still doesn’t help, you can do the following:

A. Solution for cartridges without printhead

B. Solution for cartridges with printhead

A. Cartridges without printhead (elongated cartridges)

These include: HP 364XL, 921XL HP, HP 931XL, 951XL HP

In case the cleaning program does not provide the desired result, remove the cartridge from the printer and follow these steps:

1. Make sure to use clean water (preferably distilled, tap water is also allowed) and have swabs.

2. The cartridge holder shows small strainers.

3. Use a wet cotton swab around the filter.

4. You will see that the swab absorbs the residual ink content and assumes the colour of the ink.

5. Repeat this process several times until the swab stops absorbing ink.

 

B. Cartridges with printhead (block cartridges)

These include: HP 20, HP 21, HP 56, HP 57, HP 300, HP 301

In case the cleaning program does not provide the desired result, remove the cartridge from the printer. Clean the copper-coloured area with a damp, lint-free cloth. Wipe the copper-coloured area.

Use your finger to lightly dab the tip of the cloth on the affected area, so the fabric absorbs a small amount of ink from the cartridge. This should unclog and free up the channels. Denatured alcohol is ideally suited, but can also use household water if necessary.

Then make the contact completely dry with a lint-free cloth. Then insert the cartridge back into the printer.

The cartridge HP 364XL Black can be bought loose, this cartridge is available on Coolblue.

There are two types of B210A printers:  the PREMIUM B210A – it accepts the photo black cartridge. Then there is the PLUS B210A printer, this printer will not accept the photo black cartridge.

Before removing the cartridge from its package and installing it, we recommend that you read the short installation instructions on this website or on the back of the packaging.

Installation Instructions:

1. Remove the empty cartridge from your printer.

2. Remove the new cartridge from its packaging.

3. Remove the yellow tape at the top of the cartridge.

4. Remove the orange cap.

Caution!! This sequence is extremely important. If you remove the orange cap before the yellow tape has been removed, the cartridge will leak and will no longer be usable.

5. Install the cartridge in the printer.

First, check if the yellow tape and possibly the protective cap have been removed from the cartridge. If the yellow tape has been removed and no error message appears, you can perform a cleaning program.

When you click on the link, Guide for HP printers, you are redirected to the site with HP printers. Here you can select your printer from the list and then download the manual. The manual describes how to clean the printheads, how to align the printheads and how you can check the ink levels.

If you do not get immediate results, the cleaning program should be repeated one or two times. If this doesn’t help, you can do the following:

A. Solution for cartridges without printhead

B. Solution for cartridges with printhead

 

A. Cartridges without printhead (elongated cartridges)

These include: HP 364XL, 921XL HP, HP 931XL, 951XL HP

In case the cleaning program does not provide the desired result, remove the cartridge from the printer and follow these steps:

1. Make sure to use clean water (preferably distilled, tap water is also allowed) and swabs.

2. The cartridge holder shows small strainers.

3. Use a wet cotton swab around the filter.

4. You will see that the swab absorbs the residual ink content and assumes the colour of the ink.

5. Repeat this process several times until the swab stops absorbing ink.

 

B. Cartridges with printhead (block cartridges).

These include: HP 20, HP 21, HP 56, HP 57, HP 300, HP 301

1. In case the cleaning program does not provide the desired result, remove the cartridge from the printer. Clean the copper-coloured area with a damp, lint-free cloth. Wipe the copper-coloured area.

2. Use your finger to lightly dab the tip of the cloth on the affected area, so the fabric absorbs a small amount of ink from the cartridge. This should unclog and free up the channels. Denatured alcohol is ideally suited, but you can also use household water if necessary.

3. Then dry the contact completely with a lint-free cloth. When dry, insert the cartridge back into the printer.

Because of patents, the printer cartridge of the manufacturer may be slightly different from the original. However, this has no influence on the print quality.

The exact wording of the message may vary, but the word “error” is usually present. The steps for solving such issues depend on the error code, but you can find them on the official HP website on www.hp.nl.

By clicking on the link, Guide for HP printers, you are redirected to the site with HP printers. Here you can select your printer from the list and then download the manual. The manual describes how to clean the printheads, how to align the printheads and how you can check the ink levels.

Depending on your HP printer type, it may be possible that you need to align the cartridges before they can be used. Follow the instructions on your screen. In some cases, you may need to scan the alignment to continue.

As long as the cartridges are closed they have a minimal life time of 2 years.

If the cartridge is low on ink or empty, you can clean the cartridge a few times by running the cleaning program of the printer.

By clicking on the link, Guide for HP printers , you are redirected to the site with HP printers. Here you can select your printer from the list and then download the manual. The Manual Describes how to clean the print heads, how to align the print heads and how you can check the ink levels.

If you do not get immediate results, the cleaning program Should be repeated one or two times. If this does not help, you can do the Following:

A. Solution for cartridges without printhead

B. Solution for cartridges with print head

A. Cartridges without printhead (elongated cartridges)

These include: HP 364XL, 921XL HP, HP 931XL, 951XL HP

In case the cleaning program does not Provide the Desired result, remove the cartridge from the printer and follow thesesteps:

1. Make sure to use clean water (preferably distilled, tap water is allowed THEREFORE) and swabs.

2. The cartridge holder shows small strainers.

3. Use a wet cotton swab around the filter.

4. You Will See That the swab Absorbs the residual ink content and Assumes the color of the ink.

5. Repeat this process several times until the swab stops absorbing ink.

B. For cartridges with printhead (block cartridges)

These include: HP 20, HP 21, HP 56, HP 57, HP 300, HP 301
1. In case the cleaning program does not provide the desired result, remove the cartridge from the printer. Clean the copper-coloured area with a damp, lint-free cloth. Wipe the copper-coloured area.

2. Use your finger to lightly dab the tip of the cloth on the affected area, so the fabric absorbs a small amount of ink from the cartridge. This should unclog and free up the channels. Denatured alcohol is ideally suited, but you can also use household water if necessary.

3. Then dry the contact completely with a lint-free cloth. When dry, insert the cartridge back into the printer.

The cartridge is not an original product. When installing, the printer can recognize that this cartridge is not original by reading the data stored on the cartridge’s microchip. Don’t worry, this cartridge has gone through a thorough inspection, cleaning and filling process, giving you a high-quality and compatible product.

During the initial installation of the cartridge, press OK to continue.

Order and Delivery

We stive to process and deliver your order as soon as possible. Therefore orders done before 23:00 hours we try to deliver the next day and at least within 24 hours. Haven’t you received your order within 5 workdays? Please contact our customer service.

Load More