HP Printers

  • The Following printers are working perfect with the inkline HP 364XL cartridges. Unfortunately you can not buy these printers new in a store anymore. Maybe you can find one of these printers second-handed:

HP Photosmart 551, 5512, 5514, 5515, 5520, 5522, 5524, 6510, 6520, 7510, 7515, 7520, B010, B109, B110, B111, B209, B210, B8550, C309, C310, C410, C510, C5300, C6300, D5400, D7500, Deskjet 3070, 3520, 3524, Officejet 4620, 4622.

If you are really searching for a new printer that uses inkline cartridges? We recommend you to get a Canon printer then.

The Following printers are working perfect with inkline cartridges. Unfortunately you can not buy these printers new in a store anymore. Maybe you can find one of these printers second-handed:

  • Inkline Canon 520 / 521 cartridges: Canon Pixma iP3600, iP4600, iP4700, MP540, MP550, MP560, MP620, MP630, MP640, MP980, MP990, MX860, MX870
  • Inkline Canon 525 / 526 cartridges: Canon Pixma iP4850, iP4950, iX6550, MG5150, MG5250, MG5350, MG6150, MG6250, MG8150, MG8250, MX715, MX885, MX895
  • Inkline Canon 550 / 551 cartridges: Canon Pixma MG5450, MG5550, MG6350, MG6450, MG6650, MG7150, MG7550, IX6850

If you are searching for a new printer that uses inkline cartridges? The following printers that are using the inkline Canon 550/551 cartridges are a good option:

Inkline Canon 550 / 551 cartridges:

If you can’t click away the message “cartridge not recognized”, it means the ink channels may be clogged. This blockage can be solved by running the cleaning program on your printer. You can find this under “Printer Maintenance” or “Printer Properties”. If you do not get immediate results, the cleaning program should be repeated one or two times.

By clicking on the link Guide for HP printers, you are redirected to the site with HP printers. Here you can select your printer from the list and then download the manual. The manual describes how to clean the printheads, how to align the printheads and how you can check the ink levels.

If you do not get immediate results, the cleaning program should be repeated one or two times. If this still doesn’t help, you can do the following:

A. Solution for cartridges without printhead

B. Solution for cartridges with printhead

A. Cartridges without printhead (elongated cartridges)

These include: HP 364XL, 921XL HP, HP 931XL, 951XL HP

In case the cleaning program does not provide the desired result, remove the cartridge from the printer and follow these steps:

1. Make sure to use clean water (preferably distilled, tap water is also allowed) and have swabs.

2. The cartridge holder shows small strainers.

3. Use a wet cotton swab around the filter.

4. You will see that the swab absorbs the residual ink content and assumes the colour of the ink.

5. Repeat this process several times until the swab stops absorbing ink.

 

B. Cartridges with printhead (block cartridges)

These include: HP 20, HP 21, HP 56, HP 57, HP 300, HP 301

In case the cleaning program does not provide the desired result, remove the cartridge from the printer. Clean the copper-coloured area with a damp, lint-free cloth. Wipe the copper-coloured area.

Use your finger to lightly dab the tip of the cloth on the affected area, so the fabric absorbs a small amount of ink from the cartridge. This should unclog and free up the channels. Denatured alcohol is ideally suited, but can also use household water if necessary.

Then make the contact completely dry with a lint-free cloth. Then insert the cartridge back into the printer.

The cartridge HP 364XL Black can be bought loose, this cartridge is available on Coolblue.

There are two types of B210A printers:  the PREMIUM B210A – it accepts the photo black cartridge. Then there is the PLUS B210A printer, this printer will not accept the photo black cartridge.

Before removing the cartridge from its package and installing it, we recommend that you read the short installation instructions on this website or on the back of the packaging.

Installation Instructions:

1. Remove the empty cartridge from your printer.

2. Remove the new cartridge from its packaging.

3. Remove the yellow tape at the top of the cartridge.

4. Remove the orange cap.

Caution!! This sequence is extremely important. If you remove the orange cap before the yellow tape has been removed, the cartridge will leak and will no longer be usable.

5. Install the cartridge in the printer.

First, check if the yellow tape and possibly the protective cap have been removed from the cartridge. If the yellow tape has been removed and no error message appears, you can perform a cleaning program.

When you click on the link, Guide for HP printers, you are redirected to the site with HP printers. Here you can select your printer from the list and then download the manual. The manual describes how to clean the printheads, how to align the printheads and how you can check the ink levels.

If you do not get immediate results, the cleaning program should be repeated one or two times. If this doesn’t help, you can do the following:

A. Solution for cartridges without printhead

B. Solution for cartridges with printhead

 

A. Cartridges without printhead (elongated cartridges)

These include: HP 364XL, 921XL HP, HP 931XL, 951XL HP

In case the cleaning program does not provide the desired result, remove the cartridge from the printer and follow these steps:

1. Make sure to use clean water (preferably distilled, tap water is also allowed) and swabs.

2. The cartridge holder shows small strainers.

3. Use a wet cotton swab around the filter.

4. You will see that the swab absorbs the residual ink content and assumes the colour of the ink.

5. Repeat this process several times until the swab stops absorbing ink.

 

B. Cartridges with printhead (block cartridges).

These include: HP 20, HP 21, HP 56, HP 57, HP 300, HP 301

1. In case the cleaning program does not provide the desired result, remove the cartridge from the printer. Clean the copper-coloured area with a damp, lint-free cloth. Wipe the copper-coloured area.

2. Use your finger to lightly dab the tip of the cloth on the affected area, so the fabric absorbs a small amount of ink from the cartridge. This should unclog and free up the channels. Denatured alcohol is ideally suited, but you can also use household water if necessary.

3. Then dry the contact completely with a lint-free cloth. When dry, insert the cartridge back into the printer.

Because of patents, the printer cartridge of the manufacturer may be slightly different from the original. However, this has no influence on the print quality.

The exact wording of the message may vary, but the word “error” is usually present. The steps for solving such issues depend on the error code, but you can find them on the official HP website on www.hp.nl.

By clicking on the link, Guide for HP printers, you are redirected to the site with HP printers. Here you can select your printer from the list and then download the manual. The manual describes how to clean the printheads, how to align the printheads and how you can check the ink levels.

Depending on your HP printer type, it may be possible that you need to align the cartridges before they can be used. Follow the instructions on your screen. In some cases, you may need to scan the alignment to continue.

As long as the cartridges are closed they have a minimal life time of 2 years.

If the cartridge is low on ink or empty, you can clean the cartridge a few times by running the cleaning program of the printer.

By clicking on the link, Guide for HP printers , you are redirected to the site with HP printers. Here you can select your printer from the list and then download the manual. The Manual Describes how to clean the print heads, how to align the print heads and how you can check the ink levels.

If you do not get immediate results, the cleaning program Should be repeated one or two times. If this does not help, you can do the Following:

A. Solution for cartridges without printhead

B. Solution for cartridges with print head

A. Cartridges without printhead (elongated cartridges)

These include: HP 364XL, 921XL HP, HP 931XL, 951XL HP

In case the cleaning program does not Provide the Desired result, remove the cartridge from the printer and follow thesesteps:

1. Make sure to use clean water (preferably distilled, tap water is allowed THEREFORE) and swabs.

2. The cartridge holder shows small strainers.

3. Use a wet cotton swab around the filter.

4. You Will See That the swab Absorbs the residual ink content and Assumes the color of the ink.

5. Repeat this process several times until the swab stops absorbing ink.

B. For cartridges with printhead (block cartridges)

These include: HP 20, HP 21, HP 56, HP 57, HP 300, HP 301
1. In case the cleaning program does not provide the desired result, remove the cartridge from the printer. Clean the copper-coloured area with a damp, lint-free cloth. Wipe the copper-coloured area.

2. Use your finger to lightly dab the tip of the cloth on the affected area, so the fabric absorbs a small amount of ink from the cartridge. This should unclog and free up the channels. Denatured alcohol is ideally suited, but you can also use household water if necessary.

3. Then dry the contact completely with a lint-free cloth. When dry, insert the cartridge back into the printer.

The cartridge is not an original product. When installing, the printer can recognize that this cartridge is not original by reading the data stored on the cartridge’s microchip. Don’t worry, this cartridge has gone through a thorough inspection, cleaning and filling process, giving you a high-quality and compatible product.

During the initial installation of the cartridge, press OK to continue.

Load More